may 2014 docid14430 rev 2 1 / 10 this is information on a product in full production. www.st.com 2STR1160 low voltage fast - switching npn power transistor datasheet - production data figure 1 : internal schematic diagram features ? very low collector - emitter saturation voltage ? high current gain characteristic ? fast switching speed ? miniature sot - 23 plastic package for surface mounting circuits description the device in a npn transistor manufactured using new pb - hcd (power bipolar high current density) technology. the resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. the complementary pnp is the 2str21 60. applications ? led ? battery charger ? motor and relay driver ? voltage regulation table 1: devi ce summary order code marking package packing 2STR1160 160 sot - 23 tape and reel so t -23
contents 2STR1160 2 / 10 docid14430 rev 2 contents 1 electrical ratings ................................ ................................ ............. 3 2 electrical characteristics ................................ ................................ 4 2.1 typical characteristic (curves) ................................ ........................... 5 3 package mechanical data ................................ ............................... 7 3.1 sot - 23 mechanical data ................................ ................................ .. 7 4 revision history ................................ ................................ .............. 9
2STR1160 electrical ratings docid14430 rev 2 3 / 10 1 electrical ratings table 2: absolute maximum rating symbol parameter value unit v cbo collector - base voltage (i e = 0) 60 v v ceo collector - emitter voltage (i b = 0) 60 v v ebo emitter - base voltage (i c = 0) 5 v i c collector current 1 a i cm collector peak current (t p < 5ms) 2 a p tot total dissipation at t amb = 25c 0.5 w tstg storage temperature - 65 to 150 c tj max. operating junction temperature 150 c table 3: thermal data symbol parameter value unit r thj - amb (1) thermal resistance junction - amb max 250 c/w notes: (1) device mounted on pcb area of 1 cm 2
electrical characteristics 2STR1160 4 / 10 docid14430 rev 2 2 electrical characteristics (t case = 25c unless otherwise specified) table 4: electrical characteristics symbol parameter test conditions min. typ. max. unit i cbo collector cut - off current (i e =0) v cb = 60 v 0.1 a i ebo emitter cut - off current (i c =0) v eb = 5 v 0.1 a v (br)cbo collector - base breakdown voltage (i e = 0) i c = 100 a 60 v v (br)ceo (1) collector - emitter breakdown voltage (i b = 0) i c = 10 ma 60 v v (br)ebo emitter - base breakdown voltage (i c = 0) i e = 100 a 5 v v ce(sat) collector - emitter saturation voltage i c = 0.5 a i b = 50 ma 130 210 mv i c = 1 a i b = 100 ma 210 430 mv v be(sat) base - emitter saturation voltage i c = 1 a i b = 100 ma 0.9 1.25 v h fe dc current gain i c = 0.5 a v ce = 2v 180 250 560 i c = 1 a v ce = 2v 85 130 i c = 2 a v ce = 2v 30 resistive load t on turn - on time i c = 1.5 a v cc = 10 v i b1 = - i b2 = 150 ma v bb(off) = - 5 v 220 ns t off turn - off time 500 ns notes: (1) pulse test: pulse duration = 300 s, duty cycle 1.5 %%
2STR1160 electrical characteristics docid14430 rev 2 5 / 10 2.1 typical characteristic (curves) figure 2 : dc current gain (@ vce=1 v) figure 3 : dc current gain (@ vce=2 v) figure 4 : base - emitter on voltage figure 5 : base - emitter saturation voltage figure 6 : collector - emitter saturation voltage figure 7 : capacitance curves
electrical characteristics 2STR1160 6 / 10 docid14430 rev 2 figure 8 : resistive load switching time figure 9 : resistive load switching time
2STR1160 package mechanical data docid14430 rev 2 7 / 10 3 package mechanical data in order to m eet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com. ecopack ? is an st trademark. 3.1 sot - 23 mechanical data figure 10 : sot - 23 mechanical drawing
package mechanical data 2STR1160 8 / 10 docid14430 rev 2 table 5: sot - 23 mechanical data dim. mm min. typ. max. a 0.89 1.40 a1 0 0.10 b 0.30 0.51 c 0.085 0.18 d 2.75 3.04 e 0.85 1.05 e1 1.70 2.10 e 1.20 1.75 h 2.10 3.00 l 0.60 s 0.35 0.65 l1 0.25 0.55 a 0 8 figure 11 : sot - 23 recommended footprint dimensions are in mm.
2STR1160 revision history docid14430 rev 2 9 / 10 4 revision history table 6: document revision history date revision changes 12 - feb - 2008 1 initial release 08 - may - 2014 2 updated section 3: "package mechanical data" .
2STR1160 10 / 10 docid14430 rev 2 please read carefully information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (" st") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. all st products are sold pursuant to sts terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st assumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. if any part o f this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such thir d party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. unless otherwise set forth in sts terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sa le of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right . st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchasers sole risk, even if st has been informed in writing of such usage, unless a product is express ly designated by st as being intended for "automotive, automotive safety or medical" industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shal l immediately void any warranty granted by st for the st product or service described herein and shall not cr eate or extend in any manner whatsoever, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - ch ina - czech republic - finland - france - germany - hong kong - india - israel - italy - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
